Formaldehyde-manufacture,factory,supplier from China

(Total 24 Products for Formaldehyde)
Products Description of Formaldehyde CAS#50-00-0Formaldehyde is the simplest aldehyde molecule with active chemical properties and certain toxicity. At room temperature, it is a colorless gas with a pungent odor, which easily undergoes polymerization to form polyformaldehyde. Formaldehyde is easily soluble in water, alcohol and other organic solvents.
Contact Now
 Products Description of Sodium Hydroxymethanesulphinate CAS#149-44-0Sodium bisulfite formaldehyde is translucent white orthorhombic crystals or small pieces. Apparent density 1.80~1.85g/cm3. Easily soluble in water, slightly soluble in alcohol. It has extremely strong reducing properties under high temperature and can make the dyed color disappear, so it is known as the chemical book of hanging white blocks. It decomposes when exposed to acid, and decomposes at 120°C to produce toxic gases such as formaldehyde and hydrogen sulfide.
Contact Now
Products Description of Furfural CAS#98-01-1Furfural is a colorless, transparent, oily liquid produced by hydrolysis and dehydration of pentosan in plant fiber raw materials. It is also called furan formaldehyde. It has a special aroma. Under light, heat, air oxidation and the action of inorganic acids, the color quickly changes to yellow-brown, and finally to dark brown. It is also easy to polymerize and become resinous. It should be stored away from light, deoxygenated and sealed.
Contact Now
Products Description of Glycerol formal CAS#4740-78-7Glycerol acetal (GF) is a light glycerol acetal composed of about 60% 5-hydroxy-1,3-dioxane and about 40% 4-hydroxymethyl-1,3-dioxane. Glycerol reacts with formaldehyde in the presence of an acidic catalyst to produce acetone.
Contact Now
Products Description of Melamine CAS#108-78-1Melamine, commonly known as "melamine", "protein essence" and "melamine (Pinyin: mì'àn)", is a triazine nitrogen-containing heterocyclic organic compound, often used as a chemical raw material. It is a white monoclinic crystal, almost odorless, slightly soluble in water (3.1g/L at room temperature), soluble in formaldehyde, acetic acid, hot ethylene glycol, glycerin, pyridine, etc., insoluble in acetone and ethers, harmful to the body, and cannot be used in food processing or food additives.
Contact Now
Products Description of 4-tert-Octylphenol CAS#140-66-9It is widely used in the manufacture of oil-soluble octylphenol-formaldehyde resins, surfactants, medicines, pesticides, additives, adhesives, and ink fixatives.4-tert-Octylphenol Chemical PropertiesMelting point 79-82 °C(lit.)Boiling point 175 °C30 mm Hg(lit.)density 0.95 g/cm3 (20℃)vapor pressure 2Pa at 38℃refractive index 1.5003 (estimate)Fp 145 °Cstorage temp. -20°Csolubility water: slightly soluble0.007g/L at 20°Cpka10.15±0.15(Predicted)color White flakesPH Range6 a
Contact Now
Products Description of 2-Chlorophenol CAS#95-57-8 o-Chlorophenol is a colorless to yellow-brown liquid, m.p.8.7℃, b.p.175℃, n25D 1.5565, relative density 1.265.
Contact Now
Products Description of 2,6-Di-tert-butylphenol CAS#128-39-2White or light yellow crystalline solid with phenol odor. Easily soluble in organic solvents such as alcohols, esters, alkanes, aromatic hydrocarbons, and almost insoluble in water.
Contact Now
C18H36O CAS#143-28-2 Product Introduction:Meet Pure Oleyl Alcohol, scientifically identified as C18H36O and registered under the CAS#143-28-2. This Light yellow oily liquid is a critical component in a myriad of industries, offering versatility and reliability.
Contact Now
Products Description of Neosperidin dihydrochalcone CAS#20702-77-6Neohesperidin dihydrochalcone (NHDC) is a new sweetener that is hydrogenated from neohesperidin extracted from natural citrus plants. It has high sweetness, good taste, long-lasting aftertaste, and low calories.
Contact Now
Petroleum Resins CAS#68131-77-1Petroleum resin is produced by pre-treatment, polymerization, distillation and other processes of C5 and C9 fractions produced as by-products of petroleum cracking.
Contact Now
Products Description of Potassium phosphate monobas CAS#7778-77-0Potassium dihydrogen phosphate (monopotassium orthophosphate) is a water-soluble inorganic salt. Its standard enthalpy of formation is -376.1 kcal/mol.
Contact Now
Products Description of 2-Amino-5-nitropyrimidine CAS#3073-77-62-Amino-5-nitropyrimidine CAS: 3073-77-6 Molecular formula: C4H4N4O22-Amino-5-nitropyrimidine Chemical PropertiesMelting point 235-237 °C(lit.)Boiling point 256.57°C (rough estimate)density 1.5799 (rough estimate)refractive index 1.8010 (estimate)storage temp. Keep in dark place,Inert atmosphere,Room temperaturesolubility soluble in Dimethylformamidepka0.04±0.10(Predicted)form Fine Crystalline Powdercolor Light yellowInChIKeySSHFCFRJYJIJDV-UHFFFAOYSA-NCAS DataBase Reference3073-77-6
Contact Now
Products Description of Phenol CAS#108-95-2Phenol, with the chemical formula 𝐶6𝐻5𝑂𝐻C6H6O, is a white crystalline substance known for its versatility and reactivity due to the hydroxyl group attached to the benzene ring. It serves as a key precursor in the synthesis of pharmaceuticals, including aspirin, and is integral to the production of resins, plastics, and synthetic fibers like nylon. Phenol's historical use as a disinfectant highlights its ability to denature proteins and disrupt cell membranes. It also plays a role in the detergent industry and analytical chemistry.
Contact Now
Cyclohexanone CAS#108-94-1Cyclohexanone is a colorless, clear liquid with soil smell; its impure product seems as mild yellow color. It is miscible with numerous different solvents. without difficulty soluble in ethanol and ether. The decrease publicity restrict is 1.1% and the higher publicity restriction is 9.4%.
Contact Now
MIBK CAS#108-10-1Chemical Properties:Dichloroethane is a colorless and transparent oily liquid with a chloroform-like odor and a sweet taste. It is very easy soluble in water, miscible with ethanol, chloroform and ether,it also can dissolve oil and grease, grease, paraffin. It is mainly used as a solvent.Application:Dichloroethane can be used as a standard reagent for chromatography; it is also used as a solvent for resins, rubber, cellulose acetate, cellulose esters, paints and polymers such as polystyrene; it is also used as a raw material for organic synthesis.
Contact Now
Products Description of N-Methylformamide CAS#123-39-7Pure N-methylformamide is a colorless, transparent, viscous liquid with m.p.-3.8℃, b.p.198℃, n25D 1.4310, relative density 0.9986 (25℃). It is soluble in water and inorganic salts.
Contact Now
Products Description of Benzyltriethylammonium chloride CAS#56-37-1Benzyltriethylammonium chloride is a quaternary ammonium salt, also known as quaternary ammonium salt, which has similar properties to inorganic salts, is easily soluble in water, and its aqueous solution can conduct electricity.
Contact Now
Products Description of O-Phenanthroline CAS#66-71-71,10-Phenanthroline monohydrate is an organic intermediate, white crystalline powder. It is a redox indicator, a reagent for the determination of ferrous iron, palladium, vanadium, copper, and iron.Monohydrate is a white crystalline powder.
Contact Now
Products Description of Poly(tetrahydrofuran)CAS#25190-06-1Polytetrahydrofuran is a white waxy solid that is easily soluble in alcohols, esters, ketones, aromatic hydrocarbons and chlorinated hydrocarbons, but insoluble in aliphatic hydrocarbons and water.
Contact Now
Products Description of Poly(dimethylsiloxane)CAS#9016-00-6Depending on the relative molecular mass, the appearance of polydimethylsiloxane ranges from colorless and transparent volatile liquid to extremely high viscosity liquid or silica gel. It has physiological inertness, good chemical stability, electrical insulation and weather resistance, a wide viscosity range, a low freezing point, a high flash point, good hydrophobicity, and high shear resistance. It can be used for a long time at a temperature of 50 to 180°C.
Contact Now
Products Description of Icaridin CAS#119515-38-7Icaridin, also known as Picaridin, was invented by the German company Saltigo. It is a broad-spectrum repellent with good mosquito repellent effect and long protection time. It is considered to be safer and less toxic than DEET, non-irritating to the skin, and has a higher overall level. It is also rated as the most effective mosquito repellent besides DEET by the Centers for Disease Control and Prevention of the United States. It is currently recognized as the best mosquito repellent chemical in Europe and the United States.
Contact Now
Products Description of Thiotriazolin CAS#357172-63-5Colorless liquidFactory and Equipment ShowFast delivery timeInventory 2-3 working days New production 7-10 working days
Contact Now
Calcium chloride CAS# 10043-52-4Product Description:At our company, we pride ourselves on offering high-quality Calcium Chloride with the chemical formula CaCl2. Our 99% Calcium Chloride is meticulously produced to meet the demands of various industries, ensuring optimal performance and efficiency.
Contact Now
Relate News
Urotropine, also known as hexamethylenetetramine, is a polycyclic heterocyclic compound with similar structure to adamantane, and the molecular formula is c6h12n4. Urotropine is a white crystal, which can be prepared by the reaction of formaldehyde and ammonia. The molecule contains four mutually fused triazane rings. It is limited soluble in water and easily soluble in most organic solvents.Urotropine is widely used. It can be used as raw materials for organic synthesis, analytical chemical reagents, antibiotics and fuels, and also has many uses in chemical production.
Vitamin B2 is an essential nutrient for the human body, and it is an essential substance to form the surface of human tissues and organs.Vitamin B2 cannot be stored in the human body, but the human body needs it every day, so it must be supplemented from food every day.A slight deficiency of vitamin B2 will not feel anything in the body, but when it reaches a certain level, obvious symptoms will appearWhat type of nutrient is Vitamin B2?Vitamin B2 is a member of the vitamin B group. It is a water-soluble vitamin. After being absorbed by the human body, there is not much retention in the body.
Glycerin: A Versatile Compound with Numerous ApplicationsGlycerin, also known as glycerol, is a simple polyol compound with a sweet taste and syrupy texture. It is widely used in various industries, including cosmetics, pharmaceuticals, and food. Due to its unique properties, such as being hygroscopic (attracting water) and non-toxic, glycerin has become an indispensable ingredient in many products.Glycerin in CosmeticsMoisturizer: Glycerin is one of the most effective humectants, drawing moisture from the air and into the skin.
As early as 1780, the Swedish chemist Sheele discovered lactic acid from waste milk; the production of lactic acid by fermentation originated from the natural fermentation of Boutron and Fremy in 1941; the industrial production of lactic acid by pure fermentation was started by Charles E. Avery in 1881. began; and large-scale industrial production of L-lactic acid was formed in the early 1990s.
Acetic Acid: A Versatile Compound with Numerous ApplicationsAcetic acid, commonly known as ethanoic acid, is an organic compound with the chemical formula CH₃COOH. It’s a colorless liquid with a pungent smell and sour taste.
New Research Highlights the Dual Role of Formic Acid as a Food Preservative and Potential Inducer of Antibiotic ResistanceA recent study published in Frontiers in Microbiology has shed light on the complex effects of formic acid, a common food-grade preservative, on pathogenic bacteria. The research indicates that formic acid, which is approved by the FDA for use in the food industry due to its antimicrobial properties, may also induce a viable-but-non-culturable (VBNC) state in harmful bacteria such as Acinetobacter baumannii and Klebsiella pneumoniae.
Latest Developments in Acetic Acid ProductionRecent advancements in the production of acetic acid highlight a significant shift towards more sustainable and innovative methods. Acetic acid, an essential organic compound, is increasingly produced through biotechnological processes and carbon dioxide (CO2) conversion, reflecting the industry's commitment to sustainability.Bioproduction Innovations: The biological production of acetic acid is gaining traction as a sustainable alternative. Techniques such as genetic engineering are being utilized to enhance yields and reduce production costs.
Potassium carbonate (K2CO3), as a common inorganic compound, has been widely studied and utilized since ancient times due to its unique chemical properties and versatile applications. From its natural formation to its myriad uses in modern industry, the story of potassium carbonate mirrors the progress of chemistry and the advancement of human civilization.Through the exploration of potassium carbonate, we can gain a better understanding of the substance itself and discern the multifaceted role of chemicals in modern society.
CAS#433711-95-6 IntroductionThe chemical compound (2-Bromo-pyridin-4-yl)carbamic acid tert-butyl ester, also known as CAS#433711-95-6, is a key intermediate in the synthesis of various pharmaceuticals and agrochemicals. This compound is widely used in the chemical industry due to its unique properties and versatile applications.
lycopene: dark red powder, has the unique smell and taste of lycopene.Lycopene (CAS No.: 502-65-8), dark red powder, has the unique smell and taste of lycopene. The lycopene produced by microbial fermentation mainly uses fermented substrates such as corn steep liquor, soybean meal and starch as the medium, and uses Blake Sleatrispora as the strain. After fermentation, filtration, drying, extraction, crystallization and Manufactured by refining and other processes.The main functions of lycopene are as follows:1. Anti-oxidation, delay aging;2. Improve the body’s immunity;3.
x

Submitted successfully

We will contact you as soon as possible

Close