Ethyl butylacetylaminopropionate-manufacture,factory,supplier from China

(Total 24 Products for Ethyl butylacetylaminopropionate)
Products Description of Ethyl butylacetylaminopropionate CAS#52304-36-6Mosquito repellent, also known as ethyl butyl acetylaminopropionate, BAAPE, IR3535, and Imonin, is a plasticizer and a broad-spectrum, highly effective, low-toxic insect repellent.Ethyl butylacetylaminopropionate Chemical PropertiesMelting point <-20°Boiling point bp0.2 108-110°; bp0.5 126-127°density 0.987±0.06 g/cm3(Predicted)refractive index nD20 1.452-1.455Fp 318°F (159°C)storage temp. Sealed in dry,Room Temperaturesolubility Acetonitrile (Slightly), Chloroform (Slightly), Ethy
Contact Now
Products Description of 2-Ethyl anthraquinoneCAS#84-51-5Pale yellow solid, melting point lower than anthraquinone, soluble in benzene, can be recrystallized from ethanol or acetic acid, melting point 108℃.2-Ethyl anthraquinone Chemical PropertiesMelting point 108-111 °C (lit.)Boiling point 180-190°Cdensity 1.27 g/cm3 (21℃)vapor pressure <1 hPa (25 °C)refractive index 1.6290 (estimate)Fp >210°Cstorage temp. Store below +30°C.solubility 0.00025g/lform powder to crystalcolor Light yellow to Amber to Dark greenWater Solubility Insol
Contact Now
Products Description of Potassium phosphate CAS#778-53-21-Ethyl-2-pyrrolidone is a transdermal absorption-enhancing compound and mechanism of its effect on multilammellar liposome of stratum corneum lipid has been studied.N-Ethyl-2-pyrrolidone is commonly used as a solvent. It has a low boiling point, which makes it suitable for use in low light and at constant pressure. It is also used as an intermediate in the preparation of polycarboxylic acid.
Contact Now
Products Description of Ethyl vinyl ether CAS#109-92-2Colorless flammable liquid with active chemical reaction performance. It is easy to polymerize in liquid or gas phase. Industrial products contain inhibitors to prevent polymerization. Freezing point -115℃, boiling point 35-36℃, melting point -115.8℃, relative density 0.754 (20/20℃), refractive index 1.3767, flash point -45.5℃, autoignition point 201.66℃, viscosity (20℃) 0.22mPa·s. Slightly soluble in water, only 0.9% (by weight).
Contact Now
Products Description of Ethyl 2-ethylacetoacetate CAS#607-97-6Used as an intermediate of the drug rebapidEthyl 2-ethylacetoacetate Chemical PropertiesMelting point 170 °C (decomp)Boiling point 87-189 °C/743 mmHg (lit.)density 0.981 g/mL at 25 °C (lit.)refractive index n20/D 1.421(lit.)Fp >230 °Fstorage temp. Keep in dark place,Sealed in dry,Room Temperaturesolubility Chloroform (Slightly), Methanol (Slightly)pka12.02±0.46(Predicted)form Liquidcolor Colorless to pale yellowOdorat 100.00 %.
Contact Now
Products Description of 2-[(4-Aminophenyl)sulfonyl]ethyl hydrogen sulfate CAS#2494-89-5White crystals. Soluble in water, insoluble in ethanol, ether and benzene.
Contact Now
Products Description of Diethylene Glycol Ethyl Methyl Ether CAS#1002-67-1Diethylene glycol methyl ethyl ether is a chemical.
Contact Now
Products Description of Ethyl 2-hydroxybenzoate 98% CAS#118-61-6Ethyl salicylate is a colorless oily liquid with a light wintergreen oil aroma. Boiling point is 234℃, melting point is 1.3℃. Soluble in ethanol, ether, acetic acid and most non-volatile oils, slightly soluble in water and glycerin. Used in organic synthesis or preparation of spices, and also used as solvent. The production method is obtained by esterification of o-hydroxybenzoic acid (i.e.
Contact Now
Products Description of Ethyl Chloroacetate CAS#105-39-5Ethyl chloroacetate is an organic compound, mainly used as a solvent and can also be used in organic synthesis.Ethyl chloroacetate Chemical PropertiesMelting point -26 °C (lit.)Boiling point 143 °C (lit.)density 1.145 g/mL at 25 °C (lit.)vapor density 4.23 (vs air)vapor pressure 10 mm Hg ( 38 °C)refractive index n20/D 1.421(lit.)Fp 150 °Fstorage temp. Store below +30°C.solubility 12.3g/lform Liquidcolor Clear colorlessOdorExtremely irritating; fruity; pungentexplosive l
Contact Now
Ethyl acetate CAS# 141-78-6Chemical Properties:Ethyl acetate (structure shown above) is the most familiar ester to many chemistry students and possibly the ester with the widest range of uses. Esters are structurally derived from carboxylic acids by replacing the acidic hydrogen by an alkyl or aryl group. Ethyl acetate itself is a colourless liquid at room temperature with a pleasant "fruity" smell, b.p.
Contact Now
Products Description of 3-Ethyl-3-oxetanemethanolCAS#3047-32-3Mainly used for UV polymerization, synthesis of coatings and resins.
Contact Now
Products Description of Tris(hydroxymethyl)nitromethane CAS#126-11-4Chemical, crystallizes into white crystals in a mixture of ethyl acetate and benzene.
Contact Now
Products Description of 5-{4-[2-(5-Ethyl-2-pyridyl)ethoxy]benzyl}-2-imino-4-thiazolidinone CAS#105355-26-8Organic and pharmaceutical synthesis intermediates, can be used to synthesize pioglitazone hydrochloride.5-{4-[2-(5-Ethyl-2-pyridyl)ethoxy]benzyl}-2-imino-4-thiazolidinone Chemical PropertiesMelting point 187-188°CBoiling point 557.4±60.0 °C(Predicted)density 1.28storage temp. Sealed in dry,2-8°Csolubility DMSO (Slightly, Heated), Methanol (Slightly, Heated)pka5.53±0.22(Predicted)form Solidcolor Light Brown to BeigeCAS DataBase Reference105355-26-8(C
Contact Now
Products Description of NICARBAZINE CAS#330-95-0Nicarbazin is a complex of dinitrocarbamide and hydroxydimethylpyrimidine. It is a yellow or yellow-green powder; odorless, with a slight odor. This product is slightly soluble in dimethylformamide, insoluble in water, ethanol, ethyl acetate, chloroform, and ether.
Contact Now
Products Description of BISMUTH SULFIDECAS#1345-07-9Bismuth sulfide is brown-yellow powder or crystal, with a specific gravity of 7.39. It decomposes at 685℃. It is insoluble in water and ethyl acetate, but soluble in nitric acid and hydrochloric acid.BISMUTH SULFIDE Chemical PropertiesMelting point 685°C (dec.)density 7.7 g/mL at 25 °C(lit.)solubility insoluble in H2O; soluble in acid solutionsform LumpSpecific Gravity7.7color GrayWater Solubility Insoluble in water.
Contact Now
Products Description of Nicarbazin CAS#330-95-0Nicarbazine is a complex of dinitrodiphenylurea and hydroxydimethylpyrimidine. It is a yellow or yellow-green powder; odorless, with a slight peculiar smell. This product is slightly soluble in dimethylformamide and insoluble in water, ethanol, ethyl acetate, chloroform and ether.
Contact Now
Products Description of Iminodibenzyl CAS#494-19-9Iminodibenzyl is a chemical substance with the molecular formula C14H13N.Iminodibenzyl Chemical PropertiesMelting point 105-108 °C (lit.)Boiling point 321.94°C (rough estimate)density 1.0778 (rough estimate)refractive index 1.6353 (estimate)storage temp. Keep in dark place,Sealed in dry,Room Temperaturesolubility Chloroform (Slightly), Ethyl Acetate (Slightly, Heated), Methanol (Slightly)form Crystalline Powderpka0.83±0.20(Predicted)color Yellow to beigeBRN 152732LogP4.27CAS DataBase Reference49
Contact Now
2-[(4-Amino-3-methylphenyl)ethylamino]ethyl sulfate Chemical Propertiesdensity 1.5[at 20℃]vapor pressure 0.022Pa at 20℃storage temp. Keep in dark place,Sealed in dry,Room TemperatureWater Solubility 1000g/L at 20℃LogP-5.1 at 19.9℃CAS DataBase Reference25646-71-3(CAS DataBase Reference)EPA Substance Registry SystemN-[2-[(4-Amino-3-methylphenyl)ethylamino]methanesulfonamide sulfate (2:3) (25646-71-3)Safety InformationHazard Codes T,N,XnRisk Statements 25-36/37/38-43-50/53-22-34-23/24/25Safety Statements 26-36/37-45-61-60-37-24-36/37/39-27RIDADR UN 2811 6.1
Contact Now
Products Description of Polymethylene polyphenyl polyisocyanate CAS#9016-87-9Brown transparent liquid with pungent odor.Polymethylene polyphenyl polyisocyanate Chemical PropertiesBoiling point 392 °C5 mm Hgdensity 1.2 g/mL at 25 °C(lit.)vapor density 8.6 (vs air)refractive index n20/D 1.634Fp >230 °Fstorage temp. Refrigerator, Under inert atmospheresolubility DMSO (Sparingly), Ethyl Acetate (Slightly), Methanol (Soluble)form Oilcolor Yellow to OrangeStability:Stable.
Contact Now
Products Description of Polysorbate 20 CAS#9005-64-5Appearance: amber viscous liquid, with slight special odor, slightly bitter taste. Relative density is 1.08-1.13, boiling point is 321℃. Soluble in water, ethanol, methanol and ethyl acetate, insoluble in mineral oil and petroleum ether. HLB value is 16.7. Oral LD50 of rats is 37g/kg, Adl0-25mg/kg (FAO/WHO, 1994).
Contact Now
Products Description of Dioctyl sebacate CAS#122-62-3Dioctyl sebacate, also known as bis-2-ethylhexyl sebacate, referred to as DOS, is made by esterification of sebacic acid and 2-ethylhexanol. It is suitable for polyvinyl chloride, vinyl chloride copolymers, nitrocellulose, ethyl cellulose and synthetic rubber. It has high plasticizing efficiency and low volatility. It has excellent cold resistance, good heat resistance, light resistance and electrical insulation. It also has good lubricity when heated, making the product look good and feel good.
Contact Now
Products Description of 1-Ethylpiperazine CAS#5308-25-8N-Ethylpiperazine (EPA) is one of the piperazine derivatives. As a pharmaceutical intermediate and fine chemical, it is widely used in pharmaceutical and organic synthesis. It is mainly used to synthesize ethyl ciprofloxacin antibiotics. It is also used as a synthetic raw material for dyes and plant protection agents. It is also widely used in fungicides and surfactants.
Contact Now
Products Description of diisooctyl 2,2'-[(dioctylstannylene)bis(thio)]diacetateCAS#26401-97-8Mainly used in PVC products that come into contact with food and medicine, such as plates, sheets, films, etc., and can be used in processes such as calendering, blow molding, extrusion, injection, etc.diisooctyl 2,2'-[(dioctylstannylene)bis(thio)]diacetate Chemical Propertiesdensity 1.08[at 20℃]vapor pressure 0Pa at 25℃storage temp. Refrigerator, under inert atmospheresolubility Chloroform (Slightly), Ethyl Acetate (Slightly)form Oilcolor ColourlessWater Solu
Contact Now
Products Description of Noopept CAS#157115-85-0N-(1-(phenylacetyl)-L-prolyl)glycine ethyl ester is marketed under the trade name NOOPEPT and is used to treat obesity, alcohol dependence, degeneration, or toxic injuries.Noopept Chemical PropertiesMelting point 94.0 to 98.0 °CBoiling point 547.3±50.0 °C(Predicted)density 1.202±0.06 g/cm3(Predicted)storage temp. -20°Csolubility Soluble in DMSO (up to 25 mg/ml)form powderpka13.41±0.20(Predicted)color white to beigeoptical activity[α]/D -115 to -125°, c = 0.5 in chloroform-dStability:Stable for 1 year from da
Contact Now
Relate News
Introduction2-ethyl-3-hydroxy-6-methylpyridine, also known as 2-ethyl-6-methyl-3-pyridinol, is a chemical compound with the molecular formula C8H11NO. Its CAS number is 2364-75-2. This compound is widely used in the chemical industry as a building block for the synthesis of various chemicals. In this article, we will discuss the properties, uses, and synthesis of 2-ethyl-3-hydroxy-6-methylpyridine.Properties2-ethyl-3-hydroxy-6-methylpyridine is a white to off-white crystalline powder with a melting point of 88-92°C. It is soluble in water, ethanol, and other organic solvents.
Breaking News: Innovative Advancement in Sodium Sulfur BatteriesResearchers at Osaka Metropolitan University have achieved a significant breakthrough in the development of all-solid-state sodium batteries, a promising alternative to lithium-ion batteries for next-generation energy storage systems.
The Benefits of Glucose to the Human Body|In fact, many people are familiar with glucose. This is a very helpful nutrient to the human body. It can effectively enhance the body’s immunity, improve the ability to resist viruses, maintain the balance of intestinal flora, and effectively delay skin aging. To achieve the effect of lowering cholesterol, but if excessive intake can also lead to increased blood sugar.Glucose is a kind of monosaccharide that widely exists in nature. There are many functions and functions of glucose.
Acetic Acid: A Versatile Compound with Numerous ApplicationsAcetic acid, commonly known as ethanoic acid, is an organic compound with the chemical formula CH₃COOH. It’s a colorless liquid with a pungent smell and sour taste.
Pectin is a sort of all-natural polymer substance, which generally exists in all greater plants as well as is an important component of plant intercellular compound. Pectin is transferred in the key cell wall as well as intercellular layer, and cross-links with various components of cellulose, hemicellulose, lignin microfibrils as well as some extensin in the primary wall to make various cell cells frameworks Difficult, exhibiting an intrinsic shape, and also a supporting material for internal cells.
Dextran refers to a homopolysaccharide composed of glucose as a monosaccharide. The difference in the length of the dextran chain determines its different medicinal value. Long-chain dextran is usually a blood volume expansion drug with a molecular weight of tens of thousands to hundreds of thousands; while short-chain dextran can be complexed with ferric hydroxide , made of iron dextran, that is, iron dextran.What is Dextran?Dextran is a high-molecular glucose polymer synthesized from sucrose catalyzed by dextran sucrase (dextransucrase EC2.4.1.5) produced by Leuconostocmesenteroides.
Camphor oil is one of the coloring oils used in glaze colors. Made from camphor resin. Light yellow, volatile, with a strong camphor smell. “Ceramic Color Painting”: “Use it to expand the color when painting new colors, it is easy to develop the oil, the brush is loose, and it dries quickly after painting. Pastel is rarely used, only used for freehand color expansion. Sometimes It is also used to develop dry pens, or to wipe off the residue that has consolidated in the dish, or to wipe off the dried waste line on the screen.
Groundbreaking Advancement in Phosphoric Acid Production TechnologyThe global phosphoric acid market is witnessing a significant transformation with the introduction of innovative production technologies that enhance efficiency and sustainability. According to a recent report by Grand View Research, the market size was valued at USD 41.26 billion in 2022 and is projected to grow at a CAGR of 4.2% from 2023 to 2040 .This growth is attributed to the increasing demand for phosphate fertilizers, which are crucial for the agricultural industry.
Vitamin B2 is an essential nutrient for the human body, and it is an essential substance to form the surface of human tissues and organs.Vitamin B2 cannot be stored in the human body, but the human body needs it every day, so it must be supplemented from food every day.A slight deficiency of vitamin B2 will not feel anything in the body, but when it reaches a certain level, obvious symptoms will appearWhat type of nutrient is Vitamin B2?Vitamin B2 is a member of the vitamin B group. It is a water-soluble vitamin. After being absorbed by the human body, there is not much retention in the body.
Urotropine, also known as hexamethylenetetramine, is a polycyclic heterocyclic compound with similar structure to adamantane, and the molecular formula is c6h12n4. Urotropine is a white crystal, which can be prepared by the reaction of formaldehyde and ammonia. The molecule contains four mutually fused triazane rings. It is limited soluble in water and easily soluble in most organic solvents.Urotropine is widely used. It can be used as raw materials for organic synthesis, analytical chemical reagents, antibiotics and fuels, and also has many uses in chemical production.
x

Submitted successfully

We will contact you as soon as possible

Close